35-05 Programmable Force Test Stand
INTRODUCTION
The Programmable Force Test Stand is a highly configurable motorized test stand for tension and compression applications up to 1.5 kN (300 lbF). This tester introduces a unique concept in force testing: all major controller software features are optional and may be purchased at time of order or added by the user in the field at a later date. Such flexibility makes the force test stand a highly versatile tester that can be as basic or advanced as required, from basic push/ pull requirements to advanced sequences for demanding test procedures. When fully equipped, the stand has a class-leading speed range, programmable cycling sequences with dwell time at limits, auto-return, button control options, password protection, and more. An LCD with intuitive menu navigation and modular mechanical design round out the exciting features of this motorized test stand.
STANDARD FEATURES
Controller Features
- LCD display with UP, DOWN, STOP, and emergency stop buttons and soft keys
- Selectable speed units of measurement (mm/min & in/min)
- Configurable password prevents unwanted changes to test parameters
Test Frame Features
- Integrated travel limit switches
- Removable fixture mounting plate with matrix of threaded holes
- Stepper motor-driven, produces 0% speed variation with increasing load
- Mounting holes for bench mounting
- Unique mechanical design significantly reduces column bending
OPTIONAL HARDWARE ACCESSORIES
- Digital travel display 15 cm [6 in] travel, 0.1 cm [0.0005 in] resolution,
SPC output for data collection. - Set point cable: Stops test stand travel or cycles between programmable high and low force set points. Compatible with force gauges with set point outputs only.
- Overload protection module: Protects the force gauge against overloads, adjustable from 20 - 110% of gauge’s full capacity. Compatible with force gauges equipped with analog output.
- Column extensions: Available in 15 cm (6 in), 30 cm (12 in), 60 cm (24 in), and custom lengths
OPTIONAL CONTROLLER FEATURES
Any of the below option packages may be purchased at time of order or may be added in the field at a later date by entering an activation code.
- Auto-return: The crosshead moves to a limit switch or force set point (requires a force gauge with set point outputs), stops, and reverses direction at full speed to the other limit switch or set point.
- Cycling / Dwell Time: The crosshead to move up and down between limit switches or force set points (requires a force gauge with set point outputs). Configurable up to 99,999 cycles. Dwell time allows the operator to program the length of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits.
- Programmable Button Functions: Expands UP and DOWN button operation to three user-configurable modes:
- Maintained (standard): a short push produces continuous motion until STOP is pressed
- Momentary: crosshead moves only while the button is pressed
- Auto: short push produces maintained motion, while holding the button down will produce momentary motion
- Independent Up and Down Speeds: Configurable speeds for up and down directions
- Low Speed Extended Range: Extends the speed range to 0.5 - 330 mm/min (0.02 - 13 in/min)
- High Speed Extended Range: Extends the speed range to 13 - 1100 mm/min (0.5 - 45 in/min)
- Complete Speed Range: Extends the speed range to 0.5 - 1100 mm/min (0.02 - 45 in/min)
SPECIFICATIONS
| Load capacity: Up to 24 in/min (610 mm/min) > 24 in/min (> 610 mm/min) |
1.5 kN [300 lbF] 1 kN [200 lbF] |
| Standard speed range: | 13-330 mm/min [0.5-13 in/min] |
| Maximum travel: | 317 mm [12.5 in] |
| Speed setting accuracy: | ±0.2% |
| Speed variation with load | ±0% [Stepper motor driven] |
| Limit switch repeatability | 0.03 mm [0.001 in] |
| Power: | Universal input 80-240 VAC, 50/60 Hz |
| Weight (without options): | 14.5 kg [32 lbs] |
| Included Accessories: | Extension rod, small hook, medium hook, #10-32 coupler, compression plate, force gauge mounting hardware, tool kit |
CONNECTIONS
Power: Universal input 80-240 VAC, 50/60 Hz
ORDERING INFORMATION
Catalog Number: 35-05-01
| Model No. 35-05-01 | Description |
| ESM300 | Motorized test stand, 110 V |
| ESM300E | Motorized test stand, 220 V |
| ESM300-001 | Digital travel display, 150 mm x 0.01 (6 x 0.0005 in) |
| ESM300-002-1 | Column extension, 15.2 cm (6 in) |
| ESM300-002-2 | Column extension, 30.5 cm (12 in) |
| ESM300-002-3 | Column extension, 61 cm (24 in) |
| 09-1090 | Set point cable |
| 11-1042 | Overload protection module |
| Controller Options | |
| CF001 | Auto return |
| CF002 | Cycling / dwell time |
| CF003 | Programmable button functions |
| CF004 | Independent up and down speeds |
| CF005-1 | Low speed range extension |
| CF005-2 | High speed range extension |
| CF005-3 | Complete speed range |
| CF006 | Complete options package (includes all above items) |
Call Us Today
For additional information, or to learn how Testing Machines can help your company profit through testing, please call us at 1-800-678-3221, or e-mail info@testingmachines.com.
Search Testing Machines:
PDF Product Sheet:
35-05 Programmable Force Test Stand
The TMI Catalog on CD-ROM:
The latest catalog of physical property testing equipment from the TMI Group of Companies is now available on CD-ROM.
Click here to request a copy or call 631-439-5400 or 1-800-678-3221 (from with U.S. and Canada).
The TMI Guide to Pulp and
Paper Testing:
Click here for the TMI Guide to Pulp and Paper Testing in PDF format.
