TESTING MACHINES INC.

CORRUGATED TESTING

Property or Function	Name (Click for information)	Description	Image	Catalog Number
Burst Strength	Burst Tester (Corrugated)	Burst test determines resistance to shock and penetration. 13-61 is optimized for testing corrugated. Optional accessories to measure deflection and cohesiveness of paperboard layers.		13-61
Burst Strength	Puncture Tester	Beach puncture tester measures the energy required to puncture corrugated board.		13-50-01
	M.I.T. Folding Endurance Tester	Automatically test folding endurance properties of a wide range of materials. With this machine, a pliable specimen is placed under a constant tension load. The specimen is then folded to an angle of 135° in either direction, at the rate of 175 double folds per minute until the specimen is severed at the crease.		31-23
Burst Strength	Puncture Propogation Tear Tester	Description required.		83-05
Compression	Box Compression Tester	Test the ability of a box to withstand compressive loads such as from stacking or transit.		17-40
Compression	Box Compression Tester	Test the ability of a box to withstand compressive loads such as from stacking or transit.		17-50
Compression	Compression Tester	The TMI Compression Tester is designed to provide highly accurate measurement of compressive strength for a variety of materials. Designed in close cooperation with industry, the Model 17-76 Compression Tester is rugged enough for any production testing environment		17-76
Compression	Universal Crush Tester	Measure peak load. 6 pre-set test procedures. Fixtures available for ring crush, flat crush, edge crush and ply adhesion. Automatic fast return saves time.		17-60
Corrugated	Vertical Fluter	The Vertical Fluter is designed to simulate the corrugating of a medium. Its compact, vertical design minimizes benchspace.		75-08
Corrugated	BQM	BQM was developed to measure the end results of the shearing effects which occur on the corrugated medium during a converting process. It uses a Frequency Resonance response technology to scan the flute between the walls of the carton board.		17-35
Cutter	Circular Sample Cutter	We offer a wide line of cutters to accommodate all of your sample preparation requirements for textiles and corrugated board. Circular Cutters are used to create a circular sample normally for weight determination.		22-42
Cutter	Corrugated Test Accessories	Accessories for corrugated tests including Ring Crush Test (RCT), Edge Crush Test (ECT), Flat Crush Test (FCT), Pin Adhesion Test (PAT) and Corrugated Crush Test (CCT).		17-11
Cutter	Cutters for Corrugated	Twin blade cutter cuts a precise, parallel strip sample up to 10 in. long. Models available in seven widths.		22-45
Cutter	Cutters for Corrugated	Neck-down cutter prepares corrugated board specimens for use in Edgewise Compression Test (ECT) per TAPPI T-838.		22-44
Cutter	Cutters for Corrugated	Sample cutter prepares corrugated board specimen for Edge Crush Tests (ECT) and Pin Adhesion Tests (PAT).		22-47
Friction	Coefficient of Friction Tester	Determine slide angle of sheet materials.		32-25
Humidity	Portable Sword Hygrometer	Battery operated fast, accurate measurement of equilibrium relative humidity and temperature.		08-06-01 (°F), 08-06-02 (°C)
Shear	Glue Bond Integrity Tester	Measure a glue bond's resistance to shearing forces after exposure to warm water. One element of box compressive strength testing.		80-04
Surface Testing	Cobb Sizing Testers	Provides standardized method for fast determination of the quantity of water absorbed by a paper or board in a given time.		60-05, 61-04, 61-05
Weight	Digital Basis Weight Scale	Microprocessor controlled scale for basis weight. RS-232 data output.		70-60
Data Management	TestLink	Data acquisition and management software reduces labor, eliminates transcription errors and provides real-time test results. Link any instrument or sensor with serial data output to a PC to acquire, display, analyze and store test data. Configure TestLink for a single instrument or a multi-user, multi-instrument network.		03-10
Service	Preventative Maintenance and Calibration	Maintain optimal performance of test equipment with scheduled, on-site service		04-10
Service	Set-up and Training, Extended Warranty	Assistance with instrument setup and training and the protection of extended warranties for new and repaired units is available.	Contact your nearest Sales Office.
Spare parts, accessories and consumables	Burst tester diaphragms, test foils, gauge calibration and more.	Keep your instruments at peak performance with original equipment calibration products, accessories and replacement parts.	Contact your nearest Sales Office.
Other	Many general purpose instruments can also be used to test corrugated. Select the property to be measured from the Main Index.		Contact your nearest Sales Office with details on your application.

Additional Products and Services

The TMI Group of Companies carries over 3,500 products, including many other test instruments, accessories and spare parts.
If you don't locate what you want, please contact us with your requirements.

Call Us Today

For additional information on how Testing Machines can help your company profit through testing, please call us at 1-800-678-3221,
or e-mail info@testingmachines.com.

Home | Site Index | Contact Us | Products & Services | Shows & Expos | News | Sales Reps | E-Mail

©2007 Testing Machines Inc. All rights reserved.