Tensile Strength / Stress / Strain

Product Description Property/Function Catalog #

Cold Flex Temperature Tester

Designed and built by Ray-Ran, the Cold Flex Tester determines how low temperatures affect the torsional stiffness properties of flexible materials, including polyvinyl chloride extrusion compounds, by measuring the temperature at which a test specimen is twisted through a known angular displacement using a pulley system by a specified torque. The apparatus complies with BS2782: Part 1: Method 104B, ISO458/1, 458/2 and ASTM D1043 International Test Standards.

Tensile Strength / Stress / Strain

46-12

Hand Operated Test Sample Cutting Press

Specifically designed to cut test samples such as tensile bars from relatively flexible sheet, the Ray-Ran Hand Operated Test Sample Cutting Press will produce samples from plastics, fabrics, boards and paper. In most cases, the thickness of the material that can be cut will not just depend on the strength of the material, but also on the lateral flexibility of the material to allow the cutter to penetrate down into, and pass through the material.

Tensile Strength / Stress / Strain

22-70-01

Hot Plate Film Shrinkage Apparatus

Designed and manufactured by Ray-Ran, the Hot Plate Thermal Film Shrinkage Apparatus is used to determine the thermal shrinkage of plastic film & sheeting and is ideal for most quality control procedures where precise results are essential.

Tensile Strength / Stress / Strain

46-08

Motorized Test Stand with PC Control

The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

Tensile Strength / Stress / Strain

35-10

Pneumatically Operated Test Sample Cutting Press

Specifically designed to cut test samples such as tensile bars from relatively flexible sheet, the Ray-Ran Hand Operated Test Sample Cutting Press will produce samples from plastics, fabrics, boards and paper. In most cases, the thickness of the material that can be cut will not just depend on the strength of the material, but also on the lateral flexibility of the material to allow the cutter to penetrate down into, and pass through the material.

Tensile Strength / Stress / Strain

22-70-02

Tensile Tester (Horizontal)

The model 84-56 Horizontal Tensile Tester combines a modern contemporary look with a robust mechanical design and new improved electronics including a color touch screen and user-friendly interface. The menus are interactive and the large buttons are designed for easy access.

From Messmer Büchel BV, a TMI Group of Companies brand.

Tensile Strength / Stress / Strain

84-56

Tensile Testing Machine

A fully digital tensile testing system with high precision control and accuracy. It includes automated computer control of test methods using high resolution auto-ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell capacity for accuracy and simplicity of operation.

Tensile Strength / Stress / Strain

84-01

Universal Tester 5kN CT

Tensile Strength / Stress / Strain

84-03

Universal Tester 10kN CT

The 10kN is a two-column, Universal tester that can be programmed with up to 100 different test methods. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Tensile Strength / Stress / Strain

84-03

Universal Tester 50kN AT

The 50kN is a two-column, Universal tester that can be programmed with up to 100 different test methods. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Tensile Strength / Stress / Strain

84-04

Universal Tester 20kN CT

The 20kN is a two-column, Universal tester that can be programmed with up to 100 different test methods. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Tensile Strength / Stress / Strain

84-03

Tensile Force-Compression Test Stand (ESM)

The Programmable Force Tester is a highly configurable motorized test stand for tension and compression testing applications up to 1.5kN (300 lb). The stand can be controlled from the front panel or via a computer and is fully compatible with Nexygen™ TCD software. The Programmable Force Tester is engineered on a unique modular platform, allowing for “build-your-own” configuration. Features can be ordered individually at time of order or activated in the field. Integrated travel indication, overload protection, and a host of programmable parameters makes the tester quite sophisticated, while its intuitive menu structure allows for quick, simple setup and operation. A password can be programmed to prevent unauthorized changes. With a rugged and modular design, the Programmable Force Tester is a compelling solution for applications in laboratory and production environments.

Tensile Strength / Stress / Strain

ESM-301

Programmable Force Test Stand

The Programmable Force Test Stand is a highly configurable motorized test stand for tension and compression applications up to 1.5 kN (300 lbF). This tester introduces a unique concept in force testing: all major controller software features are optional and may be purchased at time of order or added by the user in the field at a later date. Such flexibility makes the force test stand a highly versatile tester that can be as basic or advanced as required, from basic push/ pull requirements to advanced sequences for demanding test procedures. When fully equipped, the stand has a class-leading speed range, programmable cycling sequences with dwell time at limits, auto-return, button control options, password protection, and more. An LCD with intuitive menu navigation and modular mechanical design round out the exciting features of this motorized test stand.

Tensile Strength / Stress / Strain

35-05

Programmable Test Stand (w/ PC Stand)

The Programmable Force Tester is a highly configurable motorized test stand for tension and compression testing applications up to 1.5kN (300 lb). The stand can be controlled from the front panel or via a computer and is fully compatible with Nexygen™ TCD software.

Tensile Strength / Stress / Strain

35-05-01

Contact Us For Information On Additional Products
For additional information on how Testing Machines Inc. can help your company profit through testing, please call us at 1-800-678-3221, or e-mail info@testingmachines.com.