Compressive Strength

Product Description Property/Function Catalog #

Motorized Test Stand with PC Control

The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

Compressive Strength

35-10

Universal Tester 2.5kN

The 2.5kN is a single-column, universal tester. In stand-alone mode the machine can be programmed with up to 100 different test methods ranging from the most basic to the most sophisticated machine control, all with full graphics and statistical display. It is the ideal solution to testing problems where there is a need for precise, efficient and consistent performance.

Compressive Strength

84-02-02-0009

Crush Tester

The Crush Test is designed as a robust, easy to-use instrument. Exactly what you need when performing crush tests. The Crush Tester is suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics. The special sample holders extend the instrument’s possibilities. The accuracy is achieved with a precision load cell, which is even accurate at low force values.

From Messmer Büchel BV, a TMI Group of Companies brand.

Compressive Strength

17-56

Compression Tester

Designed in close cooperation with industry, the 17-76 Compression Tester is rugged enough for any production testing environment. Utilizing intuitive hardware features and menu-driven software, the 17-76 is designed to provide highly accurate measurement of compressive strength for a variety of materials.

Compressive Strength

17-76

Box Compression Tester 25kN CT

The Box Compression Tester is a four column, heavy duty tester designed to determine the compressive forces which a transport case is subjected-either in transit or stacked in a warehouse. Boxes can be tested to complete collapse or held automatically at predetermined load for a given period to evaluate stacking loads.

Compressive Strength

17-40

Top Load Compression Tester

The model 17-77 Top Load Compression Tester meets international standards and corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance.

Compressive Strength

17-77

Corrugated Test Accessories

Accessories for the Compression Tester 17-76: Use the ECT fixture to turn the 17-76 or other units into a full edge crush tester, then switch it out with the RCT to turn it into a ring crush tester. See other fixture options below for flat crush testing, pin adhesion, etc. Then contact TMI for a price on any unit or talk to someone about your application.

Compressive Strength

17-11

Short Span Compression Tester

The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner, and offers unrivaled repeatability and reproducibility. Considerable cost savings are possible through accurate prediction of corrugated component performance.

From Messmer Büchel BV, a TMI Group of Companies brand.

Compressive Strength

17-34

Programmable Test Stand (w/ PC Stand)

The Programmable Force Tester is a highly configurable motorized test stand for tension and compression testing applications up to 1.5kN (300 lb). The stand can be controlled from the front panel or via a computer and is fully compatible with Nexygen TCD software.

Compressive Strength

35-05-01

Universal Tester 10kN CT

The 10kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Compressive Strength

84-03

Universal Tester 50kN AT

The 50kN is a two-column, Universal tester that can be programmed with up to 100 different test methods. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Compressive Strength

84-04

Universal Tester 5kN CT

The 5kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Compressive Strength

84-03

Universal Tester 20kN CT

The 20kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Compressive Strength

84-03

Contact Us For Information On Additional Products
For additional information on how Testing Machines Inc. can help your company profit through testing, please call us at 1-800-678-3221, or e-mail info@testingmachines.com.