Strength

Product Description Property/Function Catalog #

84-08-35 Paper Tissue and Towel Ball Burst Strength Tester

The Model 84-08-35 determines the burst strength of paper tissue products for dry and wet applications. The burst fixture includes a sample clamp consisting of two concentric rings to hold the specimen and a 16 mm diameter probe which penetrates the material. The result is the burst force in newtons or grams required to puncture the material.

Strength

84-08-35

Environmental Stress Cracking Apparatus

The Ray-Ran Environmental Stress Cracking Apparatus determines the susceptibility of ethylene plastics to stress-cracking when exposed to different environments such as soaps, wetting agents, oils and detergents. When the material is under certain conditions of stress, these reagents can accelerate the cracking process which is one of the most common causes of unexpected brittle failure of polymers known. Designed in accordance with the ASTM D1693 international test standard, the apparatus is extremely cost effective and very simple to use.

Strength

46-06

Motorized Test Stand with PC Control

The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

Strength

35-10

Pendulum Impact Tester

The new 43-76 Pendulum Impact Tester uses a high resolution optical encoder and state-of-the-art data acquisition software to determine the impact resistance of rigid materials like plastic in accordance with a wide variety of ASTM and ISO test standards for Izod, Charpy, Chip Impact, and Un-Notched Cantilever Beam testing.

Strength

43-76

Tensile Tester (Horizontal)

The model 84-56 Horizontal Tensile Tester combines a modern contemporary look with a robust mechanical design and new improved electronics including a color touch screen and user-friendly interface. The menus are interactive and the large buttons are designed for easy access.

From Messmer Büchel BV, a TMI Group of Companies brand.

Strength

84-56

Universal Tester 2.5kN

The 2.5kN is a single-column, universal tester. In stand-alone mode the machine can be programmed with up to 100 different test methods ranging from the most basic to the most sophisticated machine control, all with full graphics and statistical display. It is the ideal solution to testing problems where there is a need for precise, efficient and consistent performance.

Strength

84-02-02-0009

Box Compression Tester 25kN CT

The Box Compression Tester is a four column, heavy duty tester designed to determine the compressive forces which a transport case is subjected-either in transit or stacked in a warehouse. Boxes can be tested to complete collapse or held automatically at predetermined load for a given period to evaluate stacking loads.

Strength

17-40

Corrugated Test Accessories

Accessories for the Compression Tester 17-76: Use the ECT fixture to turn the 17-76 or other units into a full edge crush tester, then switch it out with the RCT to turn it into a ring crush tester. See other fixture options below for flat crush testing, pin adhesion, etc. Then contact TMI for a price on any unit or talk to someone about your application.

Strength

17-11

Crease & Board Stiffness

Crease and Board Stiffness testing is useful to industries of carton board, paper, printing and packaging. The relationship between board stiffness and crease recovery (spring back) is an important factor in the performance of cartons on high speed packaging machines and in manual folding. It is crucial to have the creases in boards correct and uniform. The crease recovery (spring back) can result in forces, which distort the carton or cause stresses to be applied to closures, which reduce their effectiveness.

Strength

79-11

Internal Bond Tester and Prep Station

The Internal Bond™ Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a “Z” type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously. The Prep Station requires a filtered air supply meeting IG4 Industrial Grade Air: ISO Class 1-4-1.

Strength

80-20

Lab Master® Ball Burst Tester

The Lab Master® Ball Burst Tester measures Burst Force, Burst Strength and Burst Index with 0.1 gram resolution and 0.02% accuracy. Analyze penetration resistance (poke-through strength) of dry or wet sample. Measure and control position with 0.1 mm resolution and 0.2 mm repeatability. Thousands of data points per test are used to generate force/distance curves that reveal material behavior during test.

Strength

13-90

Short Span Compression Tester

The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner, and offers unrivaled repeatability and reproducibility. Considerable cost savings are possible through accurate prediction of corrugated component performance.

From Messmer Büchel BV, a TMI Group of Companies brand.

Strength

17-34

Tensile Testing Machine

A fully digital tensile testing system with high precision control and accuracy. It includes automated computer control of test methods using high resolution auto-ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell capacity for accuracy and simplicity of operation.

Strength

84-01

Top Load Compression Tester

The model 17-77 Top Load Compression Tester meets international standards and corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance.

Strength

17-77

Universal Tester 10kN CT

The 10kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Strength

84-03

Universal Tester 50kN AT

The 50kN is a two-column, Universal tester that can be programmed with up to 100 different test methods. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Strength

84-04

Universal Tester 5kN CT

The 5kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Strength

84-03

Universal Tester 20kN CT

The 20kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

Strength

84-03

Contact Us For Information On Additional Products
For additional information on how Testing Machines Inc. can help your company profit through testing, please call us at 1-800-678-3221, or e-mail info@testingmachines.com.